Axon synapse sfr18 with HD 4x hdd10 16ch HDSDI deembedders, 8x dbd08 cards and 3x dac24
Included in sale is
- 1x axon synapse sfr18 frame with 18 card slots
- 2x PSUs
- 1x ethernet controller card
video / audio cards installed
- 4x hdd10 hdd10 HD 8 channel dolby E de-embedder HD master card especially designed to be used in combination with the. Synapse Dolby E decoder DBD08
- 3x dac24 AES output card s(used with embedding / de emebdder cards with internal bus)
- 8x dbd08 8 channel audio card
HDD10 spec
The HDD10 is a HD master card especially designed to be used in combination with the Synapse Dolby E decoder DBD08. The propagation delay of the HD/SD-SDI is matched to the Dolby E decoder card to 1 Frame. The nice touch to this card is that there are 2 assignable deembedder blocks switchable before or after the transparent video delay. This ensures a matched audio delay for Dolby E and PCM that both can be send tothe
ADD-ON bus. The unit has fixed dual channel selection criteria so that the Dolby E stream can not be taken apart and corrupted.
- HD de-embedder master card designed for Dolby E
- Unique PCM and Dolby E transparency
- Automatic Dolby E propagation delay compensation
- Compatible with 4 PCM or Dolby E streams or any combination of 4 stereo streams.
- Delay status measurement
- Variable transparent video delay up to 8 frames in pixel increments
- Video proc amp
- Individual audio delay offset up to 85 ms per channel (8 total)
- Transparent for ATC time code RP188, RP196, RP215
- Full control and status monitoring through the front panel of the SFR04/SFR08/18 frame and the Ethernet port (ACP)
- Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel
DAC24 specs
The DAC24 is a multi-functional product. Its basic function is the conversion of AES/EBU digital audio to analog audio. In addition to
the analog outputs it has AES/EBU outputs and offers the Synapse ADD-ON function. In ADD-ON mode the card acts as an input board
that is fed by a master card that is positioned one slot left of th ADD-ON card.
The DAC24 for example acts as an analog and digital audio de-embedder when used in combination with the AXON
DBD08 specc
The DBD08 is a fully compliant Dolby E decoder. Dolby E is designed to transport multichannel audio (discrete 5.1 surround Dolby Digital) in a broadcast environment. The DBD08 decodes up to 8 channels of high quality audio plus Dolby digital metadata from a single AES pair. Fundamental to the operation of Dolby E is the synchronization of audio with video, in order to provide an exact match between encoded Dolby E audio frames and video frames Dolby E requires synchronization to a video signal. All Dolby E encoders and decoders must have either a direct reference video signal, or derive the information from a video reference signal. The DBD08 can also be used as a Dolby Digital (AC3) surround sound decoder.
- Independent Dolby E decoder
- Compatible with Dolby Digital (AC3)
- Monitor output can be used for Dolby E, PCM from channel 3/4 of bus
- ADD-ON Dolby E decoder with DBD10 or HDD10 for the de-embedding function, including before and after delay de-embedding for PCM and E data
- 8 channels on 75 Ohms BNC (4xAES/EBU)
- Output channel swapping
- Audio output gain and phase control
- Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
- Complementary cards DBE08, DDE51 HDD10
