price is for 1x SYN102 card and 1x rear connector (single plane version) with PALand NTSC SDI supported Was used in Indigo frames previously.The syn102 video frame synchroniser is designed to eliminate timing problems in all serial digital installations. The SYN102 may be used with sources without embedded audio and also as acost-effective solution for embedded audio applications where the inputand output frame rate are locked together. It offers remote or localoutput timing adjustment both horizontally and vertically, with a fulltwo fields of adjustment, and with its short minimum delay time of 2us,can be used in all applications to replace a line synchroniser.TheSYN102 has two operational modes: synchroniser and delay line. A remotefreeze function can be used in either. In synchroniser mode it willautomatically fix any incorrect frame rates (plus any delays) by takingits timing from the analogue reference. Delay line mode is said to beideal if the frame rate is correct but the source has been passedthrough equipment such as a chroma keyer and therefore subject to delay.The fixed delay can be set between 2us and two fields.The serialdigital output is said to have virtually no jitter – either when used asa synchroniser (with a stable analogue reference) or as a delay linewithout a reference. Unlike most synchronisers which are placed before arouter to ensure all inputs have the same timing, the SYN102 can followa router and have no disturbances on its video output. Designed to fitin standard frames, the 100mm x 266mm card can be used with three framerear modules (RM02, RM18 and RM23) and provides up to four SDI outputs.It can be controlled from either the board edge, an active front panelon the frame, a remote control panel or the Statesman PC control system
Product Code | CRYX14 |
Stock Level | 3 |
Condition | Used |
Weight | 15kg |