Evertz 7700 frame with 13x 7707eo13-3-hd triple channel High defintion HDSDI BNC to fibre optic converters

Evertz 7700 frame with 13x 7707eo13-3-hd triple channel High defintion HDSDI  BNC to fibre optic converters
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

P.O.A

This product is currently out of stock


Product Information
Quantity In Stock (click here)

Evertz 7700 frame with 13x 7707eo13-3-hd triple channel High defintion HDSDI  BNC to fibre optic converters wiht 1310nm laser

frame provices 42x converters in total from bnc to fibre optic.

Max HDSDI input is 1.45Gb/s format

 

From evertz below

The 7707EO13-3-HD is a Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1310nm FP laser. SC/PC, ST/PC or FC/PC connector options. Tally output on Frame Status bus upon loss of input signal.

  • Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
  • Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
  • Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
  • Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
  • Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
  • High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
  • portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
  • Detection and display of input cable length
  • Operation with multi-mode or single-mode fiber
  • SC/PC, ST/PC or FC/PC connector options
  • Tally output on Frame Status bus upon loss of input signal
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller

 

Product Code4328
ConditionUsed
Weight18kg

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top